Aico Ei141 Mains Powered Ionisation Smoke Alarm
The Aico Ei141 is an Ionisation Smoke Alarm that runs on 230V AC mains power, and has a 9V alkaline battery ...
The Aico Ei141 is an Ionisation Smoke Alarm that runs on 230V AC mains power, and has a 9V alkaline battery ...
The Ei3100RF is an Ionisation Smoke Alarm, powered by a 9V PP3 Alkaline battery (supplied). It can be interconnected wirelessly with other RadioLINK enabled Smoke/Heat alarms....
The Ei605TYWRF is a RadioLINK Optical Smoke Alarm, powered by a built-in 10 year Lithium battery. This battery is designed to outlast the usable life of the alarm....
The Aico Ei151TL is an Ionisation Smoke Alarm that runs on 230V AC mains power, and has built in tamper proof rechargeable lithium cells that act as a battery back up in the event of mains failure....
The Aico Ei168 RadioLINK Base transmits a radio frequency (RF) alarm signal when the unit attached to it senses fire. When it receives an RF signal from another Aico Ei168 Base, the attached alarm will sound....
The Aico Ei157R Pattress is designed to facilitate installation of bulky wiring and conduits....
The Aico Ei100B is an Ionisation Smoke Alarm that runs on a 9V alkaline battery (supplied with the alarm). Ionisation smoke alarms operate on the principle that electrical current flowing between electrodes in an ionization chamber is reduced when smoke particles enter....
The Aico Ei141 is an Ionisation Smoke Alarm that runs on 230V AC mains power, and has a 9V alkaline battery ...
Aico Ei100R Ionisation Smoke Alarm with Interconnect This comprehensive range of Smoke and Heat alarms is designed to operate with suitable 12volt control panels and to provide a loud local alarm....
The Aico Ei146 is an Optical Smoke Alarm that runs on 230V AC mains power, and has as a 9V alkaline battery back up in the event of mains failure....
Aico Ei128R Surface Mount Base 140 160 Series With 5 Amp Relay...
Aico Ei1529RC Remote Test And Hush Switch...
The Aico Ei151TL is an Ionisation Smoke Alarm that runs on 230V AC mains power, and has built in tamper proof rechargeable lithium cells that act as a battery back up in the event of mains failure....
Aico Ei158R Surface Mount Output Relay Base Surface mounted output relay base. This unit is fully interconnectable with up to 12 other devices...
The Aico Ei161RC is an Ionisation Smoke Alarm that runs on 230V AC mains power, and has built in tamper-proof rechargeable Lithium cells that act as a battery back-up in the event of mains failure....
The Aico Ei407 Manual Call Point is an emergency device that when activated transmits a radio frequency (RF) alarm signal....
Aico Ei159 Locator Switch For Smoke Alarms...
The Aico Ei144 is a Heat Alarm that runs on 230V AC mains power, and has a 9V alkaline battery back up in the event of mains failure....
Aico Ei105R Optical Smoke Alarm with Interconnect This comprehensive range of Smoke and Heat alarms is designed to operate with suitable 12volt control panels and to provide a loud local alarm. ...
The Ei3100RF is an Ionisation Smoke Alarm, powered by a 9V PP3 Alkaline battery (supplied). It can be interconnected wirelessly with other RadioLINK enabled Smoke/Heat alarms....
The Aico Ei408 is a RadioLINK interface module that accepts a Volt-free switched input from a hard-wired set of contacts ...
Similar to the Ei411H Remote Control, the Ei410 Remote Control is designed for use with the RadioLINK range of products....
The Aico Ei156TLH is an Optical Smoke Alarm that runs on 230V AC mains power, and has built in rechargeable lithium cells....
Aico Ei181 Ionisation Smoke Alarm 10 - 30v This comprehensive range of Smoke and Heat alarms is designed to operate with suitable 8-30volt control panels and to provide a loud local alarm. ...
The Aico Ei154TL is a Heat Alarm that runs on 230V AC mains power, and has built in tamper proof rechargeable lithium cells....
The Aico Ei166RC is an Optical Smoke Alarm that runs on 230V AC mains power, and has built in tamper-proof rechargeable Lithium cells that act as a battery back-up in the event of mains failure....
Aico Ei103R Heat Alarm with Interconnect This comprehensive range of Smoke and Heat alarms is designed to operate with suitable 12volt control panels and to provide a loud local alarm. ...
Aico Ei186 Optical Smoke Alarm 10-30v This comprehensive range of Smoke and Heat alarms is designed to operate with suitable 8-30volt control panels and to provide a loud local alarm. ...
The Ei3105RF is an Ionisation Smoke Alarm, powered by a 9V PP3 Alkaline battery (supplied). It can be interconnected wirelessly with other RadioLINK enabled Smoke/Heat alarms. ...
The Aico Ei168 RadioLINK Base transmits a radio frequency (RF) alarm signal when the unit attached to it senses fire. When it receives an RF signal from another Aico Ei168 Base, the attached alarm will sound....
The Aico Ei411H Remote Control is designed for use with the RadioLINK range of products. ...
The Ei3103RF is a Heat Alarm, powered by a 9V PP3 Alkaline battery (supplied). It can be interconnected wirelessly with other RadioLINK enabled Smoke/Heat alarms. ...
Aico Ei184 Heat Alarm 10 - 30v This comprehensive range of Smoke and Heat alarms is designed to operate with suitable 8-30volt control panels and to provide a loud local alarm. ...
The Aico Ei164RC is a Heat Alarm that runs on 230V AC mains power, and has built in tamper-proof rechargeable Lithium cells that act as a battery back-up in the event of mains failure....
The Aico Ei428 Relay Base is a device that switches a relay upon receipt of an alarm signal from a suitable Ei alarm....